Features
- 4 independent full-duplex channels
- Up to 11.2Gbps data rate per channel
- MTP/MPO optical connector
- QSFP+ MSA compliant
- Digital diagnostic capabilities
- Capable of over 100m transmission on OM3 multi-mode ribbon fiber
- CML compatible electrical I/O
- Single +3.3V power supply
- Operating case temperature: 0~70C
- XLPPI electric interface (with 1.5W Max power)
- RoHS-6 compliant
Applications
- Rack to rack
- Data Center
- Infiniband QDR, DDR and SDR
- 40G Ethernet
The QSFP-SR4 is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP+)
optical module. It provides increased port density and total system cost savings. The
QSFP+ full-duplex optical module offers 4 independent transmit and receive channels,
each capable of 10Gbps operation for an aggregate data rate of 40Gbps over 100
meters of OM3 multi-mode fiber.
An optical fiber ribbon cable with an MPO/MTP connector can be plugged into the
QSFP+ module receptacle. Proper alignment is ensured by the guide pins inside the
receptacle. The cable usually can’t be twisted for proper channel to channel
alignment. Electrical connection is achieved though a z-pluggable 38-pin IPASS connector.
The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control
signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available
with the modules. A 2-wire serial interface is available to send and receive more
complex control signals, and to receive digital diagnostic information. Individual
channels can be addressed and unused channels can be shut down for maximum
design flexibility.
The QSFP-SR4 is designed with form factor, optical/electrical connection and
digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It
has been designed to meet the harshest external operating conditions including
temperature, humidity and EMI interference. The module offers very high
functionality and feature integration, accessible via a two-wire serial interface.
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
