F-tone Networks this device uses a special digital multiplexing chip, which integrates almost all digital logic functions in the device, thus significantly improving the performance of the product and reducing the cost.
The equipment has excellent performance, stable and reliable operation, low power consumption, high integration, small size and easy installation and maintenance. A single optical fiber can simultaneously transmit 2 channels of telephone signals and 1 channel of 100m ethernet signal. Our company has the core technology, the use of PCM pulse coding modulation technology, voice quality is clear, stable and reliable, each voice signal has a three-level over current voltage protection unit, widely used in government units, electric power, public security, military, civil aviation, maritime, mining, highway and other college networks or public networks.
Features
● Provide 2 channels telephone interface
● Support 1 channel 100m ethernet
● Use of audio frequency transformer and photoelectric coupler to completely separate the telephone interface and other circuits
● Voice interface support caller ID and provide polarity reversal signal
● Each voice signal has three levels of over-current voltage protection
● Conventional standard single mode transmission 20KM, multi-mode 1KM, the farthest single mode can be customized up to 100KM
● Single fiber / dual fiber transmission (optional)
● No compression, no delay, high fidelity speech
● Plug and play, no debugging
● Perfect LED status display function, easy to maintain and manage
● The device distinguishes between transmitter and receiver, and the label distinguishes the relay switch and the telephone
Technical Indexes
|
FX0 relay（switch） |
|||||||
|
Serial no. |
Parameter |
Symbol |
Min value |
Typical value |
Max value |
Unit |
Remarks |
|
1 |
Fluid flow voltage |
VR |
30 |
|
120 |
VRMS |
（17-60）HZ |
|
2 |
Ring to check the voltage |
|
35 |
|
|
V |
|
|
3 |
Frequency ring detection |
|
17 |
|
60 |
Hz |
|
|
4 |
2-wire AC impedance |
|
200Ω+ 680Ω// 0.1uF |
|
Off-hook state |
||
|
5 |
Return loss |
|
20 |
40 |
|
db |
|
|
6 |
Depth of parallelism |
|
60 |
70 |
|
db |
|
|
7 |
Common mode rejection ratio |
CMRR |
60 |
70 |
|
db |
|
|
8 |
Power supply rejection ratio |
PSRR |
|
30 |
|
db |
|
|
9 |
Idle channel noise |
NC |
|
75 |
|
db |
|
|
FXS user（telephone） |
|||||||
|
Serial no. |
Parameter |
Symbol |
Min value |
Typical value |
Max value |
Unit |
Remarks |
|
1 |
Fluid flow voltage |
VR |
|
|
150 |
VRMS |
|
|
2 |
Ringing voltage |
Vring |
|
75 |
90
|
V
|
|
|
Ringing frequency |
|
17 |
|
60 |
Hz |
|
|
|
3 |
Cutting fluid time |
|
|
|
200 |
ms |
|
|
4 |
2-wire AC impedance |
|
200R + 680R // 0.1uF |
|
Can be adjusted to 600Ω |
||
|
5 |
Return loss |
|
20 |
40 |
|
db |
|
|
6 |
Depth of parallelism |
|
60 |
70 |
|
db |
|
|
7 |
Common rate rejection ratio |
CMRR |
60 |
70 |
|
|
|
|
8 |
Power supply rejection ratio |
PSRR |
|
|
|
|
|
|
Vcc |
|
|
30 |
|
db |
|
|
|
Vbat |
|
|
30 |
|
db |
|
|
|
9 |
Idle channel noise |
NC |
|
75 |
|
db |
|
|
Telephone physical connector |
RJ11 |
||||||
|
Fiber index |
|||||||
|
Module type |
Single fiber（standard） Multi-mode is optional |
||||||
|
Wavelength |
1310nm 1550nm（Option is based on device function） |
||||||
|
Module rate |
155Mbps/1.25Gbps（Option is based on device function） |
||||||
|
Power supply |
DC 5V1A |
||||||
|
Dimensions |
104*104*28mm |
||||||
|
Material |
Aluminium ally |
||||||
|
Tx power |
＞-12db |
||||||
|
Rx sensitivity |
＞-24db |
||||||
|
Fiber connector |
FC （standard）SC/ST/LC(optional) |
||||||
|
Ethernet index |
|||||||
|
Bandwidth |
Adaptive 10/100Mbps rate |
||||||
|
Protocol |
IEEE802.3 10Base-T Ethernet , IEEE802.3u 100Base-TX/FX Fast Ethernet , IEEE802.3x Flow control , IEEE802.1q VLAN,IEEE802.1p Qos,IEEE802.1d Spanning Tree |
||||||
|
Physical interface |
RJ45 |
||||||
|
Other index |
|
||||||
|
Working temperature |
-20°C ~70°C |
||||||
|
Storage temperature |
-40°C ~85°C |
||||||
|
MTBF |
>100,000hours |
||||||
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
